• Anamorphic

    Anamorphic

    Anamorphic Prism Pairs are used to transform elliptical laser diode beams into nearly circular beams by magnifying the elliptical beam in one dimension.

    Read More
  • Roof Prism

    Roof Prism

    Roof Prism can be used when a right angle deflection of an image or laser beam is required. In passing through the prism, the image is both deflected right-to-left and top-to-bottom. The hypotenuse of the prism utilizes total internal reflection (TIR) to reflect the image through the prism. Polarization states may become rotated during reflection.

    Read More
  • Dave Prism

    Dave Prism

    A Dove prism is used to rotate, invert, or retroreflect an image, depending upon the prism's rotation angle and the surface through which the light enters the prism. Dove prisms can be thought of as right-angle prisms with the triangular apex removed, which reduces the weight of the prism and stray internal reflections. They introduce astigmatism when used with converging light, so we recommend using them with collimated light

    Read More
  • Right Angle Prism

    Right Angle Prism

    High precision RAP:high angle precision(<5 second),high flatness( Read More

  • Beamsplitter Penta Prism

    Beamsplitter Penta Prism

    By adding a wedge and with partial reflective coating on first reflective surface.Penta Prism can be used as Beamsplitter.We supply Beamsplitter Penta Prism with standard Transmission/reflection(T/R) ratio of 20/80,50/50.Other T/R ratio is available upon request.

    Read More
  • Rhombid Prism

    Rhombid Prism

    Rhomboid prism can displace a laser beam without change the image orientation, the input beam is totally internal reflected by two 45degree faces and goes out from the output face. Then, a lateral displacement is produced. Higher transmission rate can be achieved by anti-reflective coating on the input and output faces.

    Read More
  • Penta Prism

    Penta Prism

    Penta prism can deviate an incident beam without inverting or reversing 90°.The deviation angle of 90°is independent of any rotation of the prism about an axis parallel to the line of intersection of the two reflecting faces.It is commonly used in plumb level, surveying, alignment, range finding and optical tooling.The reflecting surfaces of this Prism must be coated with a metallic or dielectric coating.The standard Penta Prism reflecting surfaces are coated with aluminum or enhanced aluminum.

    Read More
  • Corner Cube Retroreflectors

    Corner Cube Retroreflectors

    Retroreflectors reflect an image or beam back toward its original direction via three total internal reflections (TIR). The beam or image will be inverted and reflected through 180° even if the angle of incidence is not zero. The insensitivity of the alignment of these prisms make them ideal retroreflecting optics.

    Read More
Please feel free to give your inquiry in the form below. We will reply you in 24 hours.
Polarizer Beam Splitter Optical Window Laser Mirror Optical Crystal Birefringent Crystal